NUCAPT Literature Database

From NUCAPT

1–1 of 1 record found matching your query (RSS):


Select All    Deselect All
 |   | 
Details
   print
  Record Links
Type Mulholland, Michael
  Publication Co-precipitation Kinetic Pathways in a Blast Resistant Steel for Naval Applications Volume Book Whole
Pages 2011
  Abstract  
  Corporate Author  
Publisher  
Editor
  Summary Language 150 Series Editor  
Abbreviated Series Title The nanoscale co-precipitation of Cu and M2C carbides in a high strength, low carbon quenched and tempered steel is characterized in detail along with the mechanical properties and precipitated austenite. Correlations between the nanostructure and the mechanical properties are drawn. The co-precipitation of Cu, M2C (M is any combination of Cr, Mo, or Ti), and austenite (f.c.c.) is characterized for 5 h isochronal aging times by synchrotron x-ray diffraction and 3-D atom-probe tomography for a HSLC steel, BA (BlastAlloy) 160. High number densities, ca. 1023 m-3, of co-located Cu and M2C precipitates were observed. Only small austenite volume percentages (<1.5%) were measured after aging at temperatures up to 625 °C for 5 h. Nanoscale co-precipitation is studied in detail after isothermal aging. Atom-probe tomography is utilized to quantify the co-precipitation of co-located Cu precipitates and M2C (M is any combination of Cr, Mo, Fe, or Ti) carbide strengthening precipitates. Coarsening of Cu precipitates is offset by the nucleation and growth of M2C carbide precipitate, resulting in the maintenance of a yield strength of 1047 ± 7 MPa (152 ±1 ksi) for as long as 320 h of aging time at 450 °C. Impact energies of 153 J (113 ± 6 ft-lbs) and 144 J (106 ± 2 ft-lbs) are measured at - 30 °C and 60 °C, respectively. The co-location of Cu and M2C precipitates results in non- stationary state coarsening of the Cu precipitates. Synchrotron-source x-ray diffraction studies reveal that the measured 33% increase in impact toughness after aging for 80 h at 450 °C is due to dissolution of cementite, Fe3C, which is the source of carbon for the nucleation and growth of M2C carbide precipitates. Less than 1 volume percent austenite is observed for aging treatments at temperatures less than 600 °C, suggesting that TRIP does not play a significant role in the toughness of specimens aged at temperatures less than 600 °C. Aging treatments at temperatures greater than 600 °C produce more austenite, in the range 2-7%, but at the expense of yield strength. The differences in artifacts associated with voltage-pulsed and laser-pulsed (wavelength = 532 or 355 nm) atom-probe tomographic (APT) analyses of nanoscale precipitation in a high- strength low-carbon steel are assessed using a local-electrode atom-probe (LEAP) tomograph. It is found that the interfacial width of nanoscale Cu precipitates increases with increasing specimen apex temperatures induced by higher laser pulse-energies (0.6-2 nJ pulse-1 at a wavelength of 532 nm). This effect is probably due to surface diffusion of Cu atoms. Increasing the specimen apex temperature by using pulse energies up to 2 nJ pulse-1 at a wavelength of 532 nm is also found to increase the severity of the local magnification effect for nanoscale M2C metal carbide precipitates, which is indicated by a decrease of the local atomic density inside the carbides from 68±6 nm-3 (voltage-pulsing) to as small as 3.5±0.8 nm-3. Methods are proposed to solve these problems based on comparisons with the results obtained from voltage-pulsed APT experiments. Essentially, application of the Cu precipitate compositions and local atomic-density of M2C metal carbide precipitates measured by voltage-pulsed APT to 532 or 355 nm wavelength laser-pulsed data permits correct quantification of precipitation. Based on detailed three-dimensional (3-D) local-electrode atom-probe (LEAP) tomographic measurements of the properties of Cu and M2C precipitates, the yield strength of a high-toughness secondary-hardening steel, BA160, as a function of aging time is predicted using a newly developed 3-D yield strength model. Contributions from each strengthening constituent are evaluated with the model and superposition laws are applied to add each contribution. Prediction of the yield strength entirely based on 3-D microstructural information is thus achieved. The accuracy of the prediction depends on the superposition laws and the LEAP tomographic measurements, especially the mean radius and volume fraction of M2C precipitates.
  Series Issue ISSN Northwestern University  
Medium Ph.D. thesis
  Expedition Notes Evanston, IL  
Call Number  
Contribution Id English  
Serial URL ISBN  
no NU @ karnesky @ 11305
Permanent link to this record
Select All    Deselect All
 |   | 
Details
   print

Personal tools
Seidman Group
Atom-Probe Tomography
Search
Quick Search: